Huawei Ekit Unmanaged Switch S110-24LP2SR (98012198)

Original price was: ₦360,000.00.Current price is: ₦350,500.00.

Item	Details
Description	S110-24LP2SR (2410/100/1000BASE-T ports, 2GE SFP ports, PoE+, AC power)
Part Number	98012198
Model	S110-24LP2SR

0 People watching this product now!

Category: NETWORKING MATERIALS

Fast Shipping

Carrier information

Secure Shopping

You're in safe hands

24/7 Support

Unlimited help desk

Description

S110-24LP2SR

Overview

Table 4-28 Basic information about the S110-24LP2SR

Item	Details
Description	S110-24LP2SR (2410/100/1000BASE-T ports, 2GE SFP ports, PoE+, AC power)
Part Number	98012198
Model	S110-24LP2SR

Components

Figure 4-8 S110-24LP2SR appearance
Click to enlarge

1	PWR indicator	2	Twenty-four GE PoE+ electrical ports NOTE: Only the new model with the Forwarding First and PoE First silkscreens on the front panel supports the following functions: Forwarding First: This function is available on ports 1 to 8. With this function, traffic on ports 1 to 8 is preferentially forwarded when traffic congestion occurs on uplink ports. PoE First: This function is available on ports 1 to 8. With this function, terminals connected to other ports will not preempt the power of ports 1 to 8 when the device cannot supply full PoE power to connected terminals; additionally, the power of these ports will be preferentially restored after the device restarts.
3	Electrical port indicator	4	Two GE optical ports
5	Optical port indicator	6	Port mode switch button NOTE: Standard Mode: All ports are in the same VLAN, and the flow control function is enabled. Port Isolation: All downlink ports are isolated from each other and cannot communicate with each other. Downlink ports can communicate only with uplink ports. (The last two downlink electrical ports are not isolated.) Uplink ports are not isolated or aggregated. Uplink Aggregation: Two uplink optical ports are aggregated into a trunk interface. Eth-Trunk supports load balancing only based on source physical ports. Flow Control Disabling: All ports are in the same VLAN and flow control is disabled.
7	Port indicator status switch button NOTE: Port status: The port indicator indicates the data transmission status of the port. PoE status: The port indicator indicates the PoE status of the port.	8	Ground screw
9	AC socket NOTE: Use the power cable delivered with the device.	–	–

Ports

Table 4-29 Ports on the S110-24LP2SR

Port

Connector Type

Description

Available Components

GE PoE+ electrical port

RJ45

A GE PoE+ electrical port sends and receives service data at 10/100/1000 Mbit/s.

The port supports the PoE function.

Ethernet cable

GE optical port

SFP

A GE optical port can send and receive data at 100/1000 Mbit/s.

Indicators and Buttons

Table 4-30 Description of indicators on the device

Indicator	Color	Status	Description
PWR indicator	–	Off	The device is powered off.
PWR indicator	Green	Steady on	The power supply is normal.
Port indicator (Port status)	–	Off	The port is not connected or has been shut down.
	Green	Steady on	A link has been established on the port. NOTE: During device startup, all port indicators are steady green for about 2 seconds and then off, indicating that service initialization is complete.
	Green	Blinking	The port is sending or receiving data.
Port indicator (PoE status)	–	Off	The port is not supplying PoE power.
	Green	Steady on	The port is supplying power to the connected PD.
	Green	Blinking	The PoE power of the device is insufficient, and the port cannot provide power to the PD.

Power Supply System

The device uses the power adapter delivered with the device to supply power to the device and the connected PD. The power adapter can provide 124 W PoE power, which ensures full PoE power on 8 ports in compliance with 802.3af or on 4 ports in compliance with 802.3at.

Heat Dissipation System

The device has no fans and uses natural heat dissipation.

Technical Specifications

Table 4-31 Technical specifications of the S110-24LP2SR

Item	Specification
Dimensions without packaging (H x W x D) [mm(in.)]	Basic dimensions (excluding the parts protruding from the body): 43.6 mm x 442.0 mm x 260.0 mm (1.72 in. x 17.40 in. x 10.24 in.) Maximum dimensions (the depth is the distance from ports on the front panel to the parts protruding from the rear panel): 43.6 mm x 442.0 mm x 267.0 mm (1.72 in. x 17.40 in. x 10.51 in.)
Dimensions with packaging (H x W x D) [mm(in.)]	90.0 mm x 555.0 mm x 400.0 mm (3.54 in. x 21.85 in. x 15.75 in.)
Chassis height [U]	1 U
Chassis material	Metal
Weight without packaging [kg(lb)]	3.2 kg (7.1 lb)
Weight with packaging [kg(lb)]	3.7 kg (8.16 lb)
Typical power consumption [W]	24 W
Typical heat dissipation [BTU/hour]	81.89 BTU/hour
Maximum power consumption [W]	Without PoE: 24 W Full PoE load: 165 W (PoE: 124 W)
Maximum heat dissipation [BTU/hour]	Without PoE: 81.89 Full PoE load: 563
Static power consumption	13
MTBF [years]	42.92 years
MTTR [hours]	2 hours
Availability	> 0.99999
Noise at normal temperature (acoustic power) [dB(A)]	Noise-free (no fans), < 30
Noise at normal temperature (acoustic pressure) [dB(A)]	Noise-free (no fans), < 20
Number of card slots	0
Number of power slots	0
Number of fans modules	0
Switching capacity	To obtain data of this specification item, see the corresponding datasheet or contact the product sales personnel.
Packet forwarding rate	To obtain data of this specification item, see the corresponding datasheet or contact the product sales personnel.
Working mode	Standard mode Port isolation Uplink aggregation Flow control disabling
MAC address entry	8K
Redundant power supply	Not supported
Long-term operating temperature [°C(°F)]	0°C to 40°C (32°F to 104°F) at an altitude of 0-1800 m (0-5906 ft.)
Restriction on the operating temperature variation rate [°C(°F)]	When the altitude is 1800-5000 m (5906-16404 ft.), the highest operating temperature reduces by 1°C (1.8°F) every time the altitude increases by 220 m (722 ft.).
Storage temperature [°C(°F)]	–40°C to +70°C (–40°F to +158°F)
Long-term operating relative humidity [RH]	5% RH to 95% RH (non-condensing)
Long-term operating altitude [m(ft.)]	0–5000 m (0–16404 ft.)
Storage altitude [m(ft.)]	0-5000 m (0-16404 ft.)
Power supply mode	AC built-in
Rated input voltage [V]	AC input: 100–240 V AC; 50/60 Hz
Input voltage range [V]	AC input: 90 V AC to 300 V AC; 47 Hz to 63 Hz
Maximum input current [A]	3 A
Memory	–
Flash memory	–
Console port	Not supported
Eth Management port	Not supported
USB	Not supported
RTC	Not supported
RPS input	Not supported
Service port surge protection [kV]	Common mode: ±4 kV
Power supply surge protection [kV]	Differential mode: ±6 kV; common mode: ±6 kV
Ingress protection level (dustproof/waterproof)	IP20
Types of fans	None
Heat dissipation mode	Natural heat dissipation
Airflow direction	–
PoE	Supported
Certification	EMC certification Safety certification Manufacturing certification